Wireless Remote Control high-Power AC 110V/220V Wireless Remote Switch 30A high-Current Controller Relay

Package Include 1* Receiver (with cover) 1* Remote Control (with battery, with Adapter Socket , If you need extra remote control , please tell us. ) If you have any questions, please contact us Technical parameters: Working voltage: AC85 ~ 265V Standby power consumption: approx. 0.5 W Working frequency: 433MHz Encoding type: fixed code, learning code Reception sensitivity: -107dBm Output groups: 4 channel outputs with power Recommend load: 3000W resistive load, motor inductive load within 2000W Operating temperature: -10 ℃ ~ 70 ℃ Board size: 75 * 58 * 24mm Case size: 80 * 62 * 28mm Range: 200M in free field About control modes Momentary: press the button is ON. loosen your finger is OFF Toggle: press one button for one time is ON. press the same button again is OFF Latched: press one button is ON , press another button is OFF. Control mode Adjust by jumper Toggle: Jumper on "T-PIN" + medium PIN Momentary: No jumper Latch: Jumper on "L-PIN" + medium PIN Learn If you press and hold the learn button, the indicator is ON, the receiver is now LEARN. Then press any button of remote control, and LED indicator will blink 3 times. it means that the learning is successful. Delete code: Press and hold the learn button until the indicator is off. It means that all stored codes have been successfully remove.

• We have used 30A relay, output is 2 channel 220V with active current signal (electric signal), can directly to the control of AC load. Receiver can max. 30A electricity. In order to extend service life of receiver we recommend you control power at 3000 W (resistive load), 2000 W (inductive load like motor) within.
• Wireless RF signal can pass through walls, floors, doors or windows. You can use two or more units in the same place. You can turn on/ off the receiver with transmitter (remote control) from any place within a reliable distance. Reliable control: The receiver only works with the transmitter which use same code. One/several transmitters can control one/several receivers simultaneously.
• Wireless control, easy to install.LED indicator: working status is clear at first glance, chip is more compatible with remote control of fixed code and learning code, easy to operate. High power, each relay output can operate at maximum current 30A.
• Reliable control: The transmitter (Encoding) and the receiver (decoding) use an 8-bit code. One or more transmitters can simultaneously control one or more receivers. Range: 200m in the open field (Buildings, interference and interference fields reduce the range) Before shipment, technicians will test all products.
• Application: The wireless switch controls electrical appliances, such as heaters, ventilation, air conditioning, pumps, barriers, lighting, the multi-channel electric doors and windows, ordinary electronic interlock, switch, electric garage door, windows, hoists, industrial automation and control, all kinds of anti-theft alarm, security and other areas and display devices via radio.